Electricity in Fish Research and Management

Electricity in Fish Research and Management, 2nd Edition provides a comprehensive discussion of the uses of both electricity and electrical principles in fishery management and research. It covers electric fishing (including theory, equipment, data analysis and practical factors affecting efficiency), fish barriers, fish counters and fish welfare issues. The book concentrates on Electric Fishing (or Electrofishing); an internationally accepted and widely used procedure for sampling fish. Over the past 50 years electric fishing has become a standard method for fishery studies and management e.g. establishing population densities and abundance. However, due to the potential hazards of the method (both to operators and fish) there is a continuing need to develop and promote best practice guidelines. The author has studied fish ecology for 40 years and understands the need for information that reaches out to all levels of understanding in the field. Previous books on this subject have either been collections of scientific papers and/or technical reports or very simple instruction manuals. In this book theory and practice is explained using non-technical language and simple equations. It brings depth as well as breadth in both information and principles behind the methods and should be an invaluable tool to both fisheries managers and researchers. Although the book is aimed at undergraduates, the clear explanation of the factors means that the book is suitable for all levels of practitioners.

Autorentext

William (Bill) Beaumont currently works as Senior Fisheries Scientist with the Game & Wildlife Conservation Trust, UK.
Bill has covered a wide range of research topics from the effect of afforestation and acidification on upland trout populations to studies on lowland pike home range. Bill has also undertaken joint research projects in France, Lithuania, USA, Greece and Cyprus. Bill has specialized in developing methods and techniques used for fish ecological research including the use of telemetry and electrofishing.
Bill has managed a salmon counting facility at East Stoke since 1981 and also runs electric fishing training courses. Bill is currently UK Representative for Smith-Root, a North American Internationally-respected?company, which produces and sells fisheries investigation products, including electrofishing equipment.

Zusammenfassung
Electricity in Fish Research and Management, 2nd Edition provides a comprehensive discussion of the uses of both electricity and electrical principles in fishery management and research. It covers electric fishing (including theory, equipment, data analysis and practical factors affecting efficiency), fish barriers, fish counters and fish welfare issues.

The book concentrates on Electric Fishing (or Electrofishing); an internationally accepted and widely used procedure for sampling fish. Over the past 50 years electric fishing has become a standard method for fishery studies and management e.g. establishing population densities and abundance. However, due to the potential hazards of the method (both to operators and fish) there is a continuing need to develop and promote best practice guidelines.

The author has studied fish ecology for 40 years and understands the need for information that reaches out to all levels of understanding in the field. Previous books on this subject have either been collections of scientific papers and/or technical reports or very simple instruction manuals. In this book theory and practice is explained using non-technical language and simple equations. It brings depth as well as breadth in both information and principles behind the methods and should be an invaluable tool to both fisheries managers and researchers.

Although the book is aimed at undergraduates, the clear explanation of the factors means that the book is suitable for all levels of practitioners.

Inhalt

Acknowledgements, viii

1 Introduction, 1

2 The history of electricity in fish research, 3

3 Electric fishing, 7

3.1 Health and safety, 13

3.1.1 Electric shock, 14

3.1.2 Drowning, 16

3.1.3 Tripping or falling, 16

3.1.4 Trauma, 16

3.2 General issues, 16

4 Electrical terms, 17

4.1 Circuit, 19

4.2 Voltage, 19

4.2.1 Voltage gradient, 22

4.3 Voltage waveforms, 26

4.3.1 Alternating current, 27

4.3.2 Direct current, 28

4.3.3 Pulsed direct current, 30

4.3.3.1 Pulse frequency, 35

4.3.3.2 Pulse width, 38

4.4 Electrical current, 41

4.5 Power, 42

4.5.1 Power factor, 44

4.6 Resistance and resistivity, 44

4.6.1 Electrode resistance, 47

4.6.2 Kirchoff's Law, 49

4.7 Conductance and conductivity, 51

4.7.1 High?]conductivity water, 52

4.7.2 Low?]conductivity water, 52

4.8 Fish conductivity, 53

4.8.1 Waterfish conductivity ratio, 55

4.8.1.1 Graphic depiction, 57

4.8.1.2 Circuit theory, 57

4.8.1.3 Power Transfer Theory (PTT), 58

5 Electric fishing equipment, 63

5.1 Generators, 64

5.1.1 Use of multiple generators and control boxes, 65

5.2 Control boxes, 66

5.2.1 Generator?]based control boxes, 67

5.2.1.1 Control boxes with no facility to control output, 68

5.2.1.2 Control boxes with limited ability to control output, 68

5.2.1.3 Control boxes where many parameters of the output can be controlled, 70

5.2.2 Battery?]powered control boxes, 71

5.3 Electrodes, 72

5.3.1 Anodes, 73

5.3.1.1 Anode shape, 75

5.3.1.2 Anode size, 77

5.3.1.3 Twin and multiple anodes, 79

5.3.1.4 Anode ergonomics, 81

5.3.2 Pre?]positioned area samplers (PPAS), 82

5.3.3 Point abundance sampling using electricity (PASE), 83

5.3.4 Electric nets, 84

5.3.5 Cathodes, 85

5.4 Hand nets, 87

5.4.1 Banner nets, 90

5.5 Stop nets, 90

5.6 Protective and safety equipment, 92

5.6.1 Waders, 92

5.6.2 Gloves, 92

5.6.3 Other protective clothing, 93

5.6.4 Lifejackets, 93

6 Practical factors affecting electric fishing efficiency, 94

6.1 Manpower requirements, 94

6.2 Streambed: conductivity and substrate type, 95

6.3 Weather, 96

6.4 Water temperature, 96

6.5 Fish size, 97

6.6 Fish species, 98

6.7 Fish numbers, 99

6.8 Water clarity, 100

6.9 Site length, 100

6.10 Water depth, 101

6.11 Site width, 101

6.12 Time of day, 102

7 Electric fishing working techniques, 103

7.1 Operator skill and fishing and processing methods, 103

7.2 Fishing using wading, 106

7.2.1 Wading fishing using boats, 108

7.3 Fishing from boats, 110

7.3.1 Boom?]boats, 111

8 Electric fishing 'best' practice, 116

9 Fish population assessment methods, 122

9.1 Estimating relative abundance, 124

9.2 Estimating actual population size, 126

9.2.1 Capturemarkrecapture estimates (CMRs), 127

9.2.2 Catch depletion estimates, 128

10 Fish barriers, 132

11 Fish counters, 138

12 Electroanaesthesia, 142

13 Fish welfare, 145

13.1 Fish handling, 146

13.2 Stress, 146

13.3 Anaesthesia, 148

13.4 Fish density in holding bins, 151

13.5 Oxygen and carbon dioxide, 153

13.6 Ammonia, 154 13.7 Temperat...