Vollständig überarbeitete,aktualisierte 2. Auflage mit fünf neuen Kapiteln und den aktuellen IUPAC-Normen. Beschäftigt sich mit thermischen Risiken in der chemischen Prozessindustrie. Jedes Kapitel beginnt mit einer Fallstudie und den aus Zwischenfällen gewonnen Erkenntnissen.

Autorentext

Professor Francis Stoessel is Head of Chemical Process Safety Consulting in the Swissi Process Safety GmbH. After graduating in Chemical Engineering from the Universite de Haute Alsace, he spent most of his career working for Ciba-Geigy in their Chemical Engineering Department. He was Head of the Thermal Safety Department at Ciba, later of Process Safety Consulting at Novartis. He then took up a professorship at the Swiss Federal Institute of Technology at Lausanne. Prof. Stoessel has received awards from the Swiss Expert Commission for Safety in the Chemical Industry and the Swiss Society for Thermal Analysis and Calorimetry.

Inhalt
Part I General Aspects of Thermal Process Safety

1. Introduction to Risk Analysis of Fine Chemical Processes
2. Fundamentals of Thermal Process Safety
3. Assessment of Thermal Risks
4. Experimental Techniques

5. Assessment of the Energy Potential

   Part II Mastering Exothermal Reactions

6. General Aspects of Reactor Safety
7. Batch Reactors
8. Semi-Batch Reactors

9. Continuous Reactors

   Part III Avoiding Secondary Reactions

10. Thermal Stability
11. Autocatalytic Reactions
12. Heat Accumulation

13. Physical Unit Operations

    Part IV Technical Aspects of Risk Reduction

14. Heating and Cooling Industrial Reactors
15. Risk Reducing Measures
16. Emergency Pressure Relief
17. Reliability of Risk Reducing Measures
18. Development of Safe Processes