Includes information on homogeneous charge compression ignition (HCCI) combustion and control strategies Offers a novel approach to recover the pumping loss in the spark ignition engine Focuses on the use of alternative fuels in combination with new combustion technology Includes supplementary material: sn.pub/extras

Autorentext

Dr. Dhananjay Kumar Srivastava has been an assistant professor of Mechanical Engineering at the Indian Institute of Technology Kharagpur since April 2015. He did his Ph.D. at the Engine Research Laboratory of IIT Kanpur in 2013, and was subsequently a research fellow at the University of Birmingham, UK. His areas of expertise include laser ignition for engines, combustion visualization, emission control, engine calibration, and gasoline direct injection. Dr. Srivastava received the Gandhian Young Technological Innovation Award in March 2013 and a Pool Scientist fellowship from the CSIR, India from 2010 to 2013.

Prof. Avinash K. Agarwal joined the IIT Kanpur in 2001. His areas of interest are IC engines, combustion, alternative fuels, conventional fuels, optical diagnostics, laser ignition, HCCI, emission and particulate control, and large-bore engines. He has published over 230 international journal and conference papers. Prof. Agarwal is a fellow of the SAE (2012), ASME (2013), ISEES (2015) and INAE (2015). He has received several awards such as the prestigious Shanti Swarup Bhatnagar Award in Engineering Sciences in 2016; Rajib Goyal Prize in 2015; NASI-Reliance Industries Platinum Jubilee Award in 2012; and the INAE Silver Jubilee Young Engineer Award-2012.

Dr. Amitava Datta is a professor at Jadavpur University's Department of Power Engineering. He received his degree in Mechanical Engineering from Jadavpur University and his PhD from IIT Kharagpur. Dr. Datta was the recipient of an Alexander von Humboldt Fellowship in the year 2000 and worked at the Lehrstuhl für Technische Thermodynamik at the University of Erlangen Nuremberg. His research interests include combustion, atomization, energy, thermodynamic modeling and application of computational fluid dynamics (CFD) in reacting flows, microfluidics and biological flows. He has published 83 peer-reviewed research papers in various international journals and at conferences.

Dr. Rakesh Kumar Maurya has worked at the Department of Mechanical Engineering, Indian Institute of Technology Ropar since August 2013. Before joining IIT Ropar, he worked as a CSIR Pool Scientist. He received his bachelor's, master's and PhD degrees, all in Mechanical Engineering from the Indian Institute of Technology Kanpur. He is a recipient of Young Scientist Award (2016) from the International Society for Energy, Environment and Sustainability. His areas of interest are low-temperature engine combustion, alternative fuels, engine combustion diagnostics, engine instrumentation, combustion and emission control, particulate matter characterization, engine management systems, and philosophy of science.

Inhalt
Part I General.- Introduction to Horizons in Internal Combustion Research.- Part II Advanced Technology for Internal Combustion Engines.- Low Temperature Combustion: An Advanced Technology for Internal Combustion Engines.- Characterization of Ringing Operation in Ethanol Fueled HCCI Engine using Chemical Kinetics and Artificial Neural Network.- Variable Valve Actuation Systems.- Performance, Combustion and Emissions Characteristics of Conventional Diesel Engine Using Butanol Blends.- Hydrogen Enriched Compressed Natural Gas: An Alternate Fuel for IC Engines.- Characterization of Cycle to Cycle Variations in Conventional Diesel Engine Using Wavelets.- Part III Exhaust After-treatment and its Heat Recovery.- Recent Advancements in After-treatment Technology for Internal Combustion Engines: An Overview.- Calcium Oxide Nanoparticles as an Effective Filtration Aid for Purification of Vehicle Gas Exhaust.- Exhaust Heat Recovery using Thermoelectric Generators: A Review.- Part IV Numerical/Simulation.- Chemical Kinetic Simulation of Syngas Fueled HCCI Engine.- Gasoline Compression Ignition A Simulation-Based Perspective.- Application of C.F.D. for Analysis and Design of I.C. Engines.- Part V Next Step for Indian Automotive Industry.- Future Mobility Solutions of Indian Automotive Industry: BS-VI, Hybrid and Electric Vehicles.