This book assesses the current development and potential applications of nanoparticle technology in oil industry and explores new research directions in this frontier field. It outlines the theory and practical challenges of the nanoparticle colloidal behavior in oil matrixes and aqueous solutions, the interactions between rock and nanofluid, nanoparticles and asphaltenes, and the surface phenomena relevant to the application of this technology. The book also describes the transport behavior of nanoparticles in oil/sand media for in-situ upgrading and recovery of heavy oil. Currently, the main objectives of applying nanoscale materials in oil industry are the remediation of formation damage, the improvement of energy efficiency, the abatement of environmental footprints and the increment of recovery factors of oil reservoirs, to name a few. The book consists of 15 chapters with contributions by leading experts in the topics of fabrication methods, opportunities and challenges in the oil & gas industry, modeling and application of nanofluids in the field and environmental applications of nanoparticles. The growing demand for oil has led to the need to exploit unconventional oil resources, such as heavy and extra-heavy crude oil. However, in the current context, upgrading and recovery of heavy oil are highly energy and water intensive, which consequently results in environmental impacts. Therefore, it is necessary to search for new ideas and alternatives in the field of in-situ and ex-situ upgrading and recovery to improve current technologies and make them both environmentally sound and cost-effective. Research conducted by the authors and numerous other researchers has shown that nanoparticle technology could be successfully employed for enhancing the upgrading and recovery of heavy oil with cost-effective and environmentally friendly approaches. Examples on the applications of nanoparticles in heavy oil include the adsorption, oxidation, and gasification/cracking of asphaltenes, a problematic constituent present in heavy oils; in-situ upgrading of the Athabasca bitumen by multi-metallic in-situ prepared nanocatalysts; the inhibition of precipitation and deposition of asphaltnes; and the enhanced perdurability against asphaltene damage in oil sands porous media by injection of nanofluids; sequestration of oil from spilled by nanoparticles, cleaning up oil sand process affected water by integrating nanoparticle with conventional treatment processes, etc.

Autorentext

Dr. Nashaat N. Nassar is a full professor in the Department of Chemical and Petroleum Engineering at the University of Calgary. He leads a large research group focuses on the development and application of naturally-derived nanomaterials in energy and the environment. He established a world-leading, industrially-connected Laboratory for Nanomaterials Research, and he is currently working with several national and international oil and gas companies to commercialize his research. Energy and environment applications are the dominant theme of his research activities to serve the Canadian community. Dr. Nassar's research program emphasizes on the development of new technologies to improve the sustainability of unconventional hydrocarbon recovery processes and to advance the transition to low carbon energy sources. Dr. Nassar communicated his scientific knowledge through publishing 110 peer-reviewed journal papers, ten book chapters, two books, seven filed USA patents and six invention disclosures, and founded two spin off companies (NanoSoln Inc. and Carbon OxyTech Inc.). He has an h-index of 42 and his work has been cited 5179 times. He has received several prestigious awards and has delivered 50 invited talks in renowned national and international conferences and universities. Not only is he pushing the limits of science and technology in his field, but he does also so in collaboration with national and international top-ranked industrial sponsors, who understand and benefit from his unique approach to solving real world problems. Funding for his research has been through national programs such as NSERC DG, Engage, and Alliance, provincial funding through Alberta Innovates, industry contracts with Cenovus Energy, Seven Generation Energy, Executive Mat Services, and international funding through organizations such as CIATEC-PROFTECH-CONACYT-PEMEX, Mexico; Chevron USA Inc; QEERI in Qatar, and Werner Graupe International. He trained 11 postdoctoral fellows, 12 PhD students, 26 Masters students and 40 undergraduate students. Many of his former HQPs are now employed in the Canadian energy industry and professors in international universities. Dr. Nassar serves on several administrative committees at UCalgary, mainly focused on teaching and professional development. Also, served as an expert reviewer for research grant proposals and peer-reviewed journals and acted as an associate editor for the Natural Gas Science and Engineering journal and Energies.

Dr. Farid B. Cortés obtained his title as a Chemical Engineer in 2004 from Universidad Nacional de Colombia. Dr. Cortés obtained an MSc in Chemical Engineering and Ph.D. in 2006 and 2009, respectively. He is a full professor at the Department of Chemical and Petroleum Engineering in Universidad Nacional de Colombia since 2011, being one of the youngest professors in receiving a full professorship in the faculty. Since its enrollment to the university, Prof. Dr. Cortés founded and directed the research group in Surface Phenomena-Michael Polanyi. He has published more than 140 papers (peer- review) in indexed journals (Q1 and Q2), 5 books and more than 10 book chapters, and more than 5 patents. He has participated in more than 50 scientific events at national and international levels, receiving multiple recognitions including Great Winner in the Colombian Petroleum Conference in 2019 organized by the Colombian Association of petroleum engineers. He has the leader of about 70 projects in research and development, innovation, as well as social responsibility modality. He has been the director of more than 50 undergraduate and postgraduate theses. He is editor in Processes Journal and guest editor in several high-quality scientific journals. Also, during 2020, he was Vice-dean of research and development and Dean in charge of the Faculty of Mines of the Universidad Nacional de Colombia. Dr. Cortés participated in the first interventions in formation damage and enhanced oil recovery with nanotechnology worldwide, with an oil production accumulated larger than 4 million oil barrels using nanofluids and nanoparticles. Dr. Camilo A. Franco is a petroleum Engineer and Ph.D. in engineering-energy systems from the Faculty of Mines of the National University of Colombia - Medellín. He also holds a Master's degree in plastic and visual arts at the same university. He has more than 9 years of experience developing nanotechnology for applications in the oil and gas industry. He has published more than 80 scientific articles, 10 book chapters, 2 patents and 100 national and international presentations. Also, he has won more than 10 awards, including Great Winner in the Colombian Petroleum Conference in 2019 organized by the Colombian Association of petroleum engineers. Currently is an associate professor in the Department of Processes and Energy at the Faculty ...

Inhalt
Chapter 1. Nanoparticle Preparation, Stabilization and Control over Particle Size.- Chapter 2. Nanoparticles as Potential Agents for Enhanced Oil Recovery.- Chapter 3. Nanoparticles as Adsorbents for Asphaltenes.- Chapter 4. Nanoparticles as catalyst for asphaltenes and waste heavy hydrocarbons upgrading.- Chapter 5. Effect of Pressure on Thermo- and Thermocatalytic Oxidation of Asphaltenes.- Chapter 6. Nanoparticles for Heavy Oil Upgrading.- Chapter 7. Nanotechnology Applications for Viscosity Reduction of Heavy and Extra-Heavy Oils: A Review.- …