Intended for engineers from a variety of disciplines dealing with structural materials, this text describes the current state of knowledge. It begins by describing the fracture process at the two extremes of scale: first in the context of atomic structures, then in terms of a continuous elastic medium. Treating the fracture process in increasingly sophisticated ways, the book then considers plastic corrections and the procedures for measuring the toughness of materials. Practical considerations are then discussed, including crack propagation, geometry dependence, flaw density, mechanisms of failure by cleavage, the ductile-brittle transition, and continuum damage mechanics. The whole is rounded off with discussions of generalised plasticity and the link between the microscopic and macroscopic aspects, and problems are provided at the end of each chapter.

Inhalt

1 Microscopic aspects of fracture: Cohesive stress.- 2 Linear elastic behaviour of flaws: Purely elastic treatment.- 2.1 The notch: stress and strain concentrations.- 2.2 The crack: stress intensity factors.- 2.3 The three-dimensional crack.- 3 Linear elastic treatment of flaws: Plasticity correction.- 3.1 Model of small scale yielding for a notch.- 3.2 Models of small scale yielding for a crack.- 3.3 Implications of these models in fracture.- 4 Linear elastic treatment of fracture: The risk of brittle fracture.- 4.1 The toughness.- 4.2 The flaw.- 4.3 The mechanical loading.- 4.4 Example of application: Pressure vessels.- 5 Microscopic aspect of fracture: Cleavage and ductile rupture.- 5.1 Background of Dislocation Theory.- 5.2 Experimental modes of investigation.- 5.3 Cleavage fracture.- 5.4 Intergranular fracture.- 5.5 Ductile fracture.- 5.6 Shear fracture.- 5.7 The ductile-brittle transition with smooth and notched specimens.- 6 Plastic treatment of discontinuities: Fully plastic treatment and large deformation correction.- 6.1 Rigid-perfectly plastic material: The limit load.- 6.2 Strain hardening plastic material: The contour integral.- 6.3 The three-dimensional problem.- 6.4 Crack extension.- 6.5 Using the J integral in fatigue analysis.- 7 Plastic treatment of discontinuities: Elastic-plastic treatment.- 7.1 General description of stress and strain fields.- 7.2 The small-scale yielding and theQfamily of fields.- 7.3 Small Scale Yielding and mixed modes.- 7.4 Finite-width crack bodies.- 7.5 The loading parameters.- 7.6 The three-dimensional problem.- 7.7 The quasi-static growth.- 7.8 Implication of these models for fracture.- 8 Elastoplastic treatment of discontinuities: The risk of fracture.- 8.1 Toughness: Relationship between microscopic and macroscopic aspects.- 8.2 Structural applications.- Appendices.- Guide for Further Reading and Bibliography.- Answers to Selected Problems.