Beschreibung

This book shows how jute waste is collected from industry and used as a cheaper source to extract and use cellulose. Novel environment-friendly methods are explored for surface modification of natural fibers. The advantages of using biocomposites are listed and the author shows how they can be used effectively as secondary structural parts.

Presents natural fiber polymer composites

Proposes jute waste as a cheap source to extract cellulose

Explores novel environmentally friendly methods for surface modification of natural fibers

Autorentext
Abdul Jabbar is a PhD scholar in the Department of Material Engineering Technical University of Liberec, Czech Republic and a lecturer at the National Textile University Faisalabad, Pakistan. 

Klappentext

This book shows how jute waste is collected from industry and used as a cheaper source to extract and use cellulose. Novel environment-friendly methods are explored for surface modification of natural fibers. The advantages of using biocomposites are listed and the author shows how they can be used effectively as secondary structural parts.

Zusammenfassung
This book shows how jute waste is collected from industry and used as a cheaper source to extract and use cellulose. Novel environment-friendly methods are explored for surface modification of natural fibers. The advantages of using biocomposites are listed and the author shows how they can be used effectively as secondary structural parts.

Inhalt

CHAPTER 1: INTRODUCTION

CHAPTER 2: LITERATURE REVIEW

2.1 Natural Fiber Composites. 3

2.2 Natural Fibers and their Classification. 3

2.3 Chemical Composition and Structure of Plant based Natural Fibers. 3

2.3.1 Cellulose. 7

2.3.2 Hemicelluloses. 7

2.3.3 Lignin. 8

2.3.4 Pectin. 9

2.4 Bast Fibers. 9

2.5 A Brief Overview of Jute Fiber. 11

2.6 Natural Fibers Reinforced Composites in Automotives. 12

2.7 Polymer Matrices. 14

2.7.1 Thermosets. 14

2.7.2 Thermoplastics. 15

2.7.3 Rubber Matrices. 15

2.7.4 Bio-based Polymer Matrices. 15

2.8 Jute Fiber Reinforced Polymer Composites. 16

2.9 Micro/nano Cellulose Filler Composites. 18

2.10 Surface Treatments of Natural Fibers. 19

2.10.1 Chemical Treatment of Natural Fibers. 19

2.10.2 Physical Treatments of Natural Fibers. 23

2.10.3 Biological Treatments of Natural Fibers. 24

2.11 Creep in Natural Fiber Composites. 26

2.12 Creep Models. 29

CHAPTER 3: EFFECT OF PULVERIZED MICRO JUTE FILLERS LOADING ON THE MECHANICAL, CREEP AND DYNAMIC MECHANICAL PROPERTIES OF JUTE/GREEN EPOXY COMPOSITES

CHAPTER 4: EXTRACTION OF NANOCELLULOSE FROM WASTE JUTE FIBERS AND CHARACTERIZATION OF MECHANICAL AND DYNAMIC MECHANICAL BEHAVIOR OF NANOCELLULOSE COATED JUTE/GREEN EPOXY COMPOSITES

CHAPTER 5: FLEXURAL, CREEP AND DYNAMIC MECHANICAL EVALUATION OF NOVEL SURFACE TREATED WOVEN JUTE/GREEN EPOXY COMPOSITES

CHAPTER 6: Future prospectives in the field

Produktinformationen

Titel:	Sustainable Jute-Based Composite Materials
Untertitel:	Mechanical and Thermomechanical Behaviour
Autor:	Abdul Jabbar
EAN:	9783319654560
ISBN:	331965456X
Format:	Kartonierter Einband
Herausgeber:	Springer International Publishing
Anzahl Seiten:	116
Gewicht:	211g
Größe:	H235mm x B155mm x T6mm
Jahr:	2017
Untertitel:	Englisch
Auflage:	1st ed. 2017